Woca Worktop Kit Natural

An all-in-one maintenance kit for interior worktops and furniture. Cleans, protects and enhances the natural beauty of the wood.

 

Features and Highlights

• An all-in-one care and maintenance kit for wooden worktops, table tops and furniture.
• Protects the woods surface and provides a tough, durable, lasting finish.
• Excellent resistance against stains & liquid spills.
• Enhances the natural beauty of wood.
• Food safe when dry.
• Very High V.O.C

 

Overview 

Woca worktop kit contains everything needed for the maintenance and upkeep of wooden worktops and table tops. Enhancing the woods natural beauty, whilst maintaining and protecting its finish.

Woca Worktop Kit contains:

• Woca Worktop Oil, 750ml –  A durable, food safe worktop oil which enhances and protects wooden worktops and furniture.
• Woca Intensive Wood Cleaner, 250ml – A concentrated wood cleaner specifically developed for the deep cleaning of interior wood floors, furniture and more.
• Abrasive Pad – The supplied abrasive pad can be used to help remove scuffs or dirt from oiled work surfaces prior to cleaning and during renovation.
• White Polishing Pad – Use the supplied polishing pad to work the oil in fully, following the natural grain of the wood.
• Lint-free cloth – For removing all excess oil from the surface of the wood after polishing.
• Gloves – To protect hands and keep them clean.
• Instructions and advice booklet

 

Preperation

Kitchen work tops and other wooden surfaces to be treated must be clean, dry and free from all surface coatings and contaminates before applying Woca Worktop Oil.

1. New or previously oiled work tops can be lightly sanded back using the supplies sanding pad.
2. To remove existing paint or varnishes, use a suitable paint and varnish remover.
3. Ensure that all traces of sanding dust have been removed using a vacuum cleaner.
4. Following the product instructions, thoroughly clean the area first, using the Woca Intensive Wood Cleaner.
5. Allow to dry for atleast 8 hours before applying wodktip oil.

 

Application

Always do a test area before starting any project to assess product suitability and final finish. Folow the manufacturer’s instructions on the container at all times.

Ensure normal room temperature of 18-25°C and use only in well ventilated areas. his product is ready to use and does not require thinning. Stir well before use.

1. Apply an even film of Worktop Oil to the surface with a natural bristle brush or lint-free cotton cloth.
2. Leave the oil to soak into the surface for 30 minutes, applying more on dry areas if needed.
3. Using the white polishing pad, work the oil fully in to the grain of the wood.
4. Wipe off any excess with the clean, lint-free cloth supplied.
5. Allow the surface to sit for an hour, before applying a further 1-2 coats.
6. After the final coat, lightly abrade/ denib with the sanding pad.
7. Wipe the surface with a clean, lint-free cloth.

Surfaces are ready for light use after 24 hours, but wont be fully cured for a further 7 days, so will need to be protected from dirt and prevent staining and discolouation. Any spills should be wiped up imediatley.