Treatex Hard Wax Oil Ultra Natural

Treatex Hardwax Oil Ultra is our next generation Hardwax Oil, designed to enhance and protect the natural beauty of all your interior timber surfaces. Hardwax Oil Ultra follows the success of our current formulas benefits of being user friendly, easy to apply, and quick drying, whilst improving ease of application and the durability of the finish.

The end result is a hard wearing, attractive finish in any situation including, floors, doors and kitchen worktops that is easy to maintain with our maintenance products and is spot repairable if the surface is damaged.

Treatex Hardwax Oil Ultra is also based on the Treatex formulation of sustainable raw materials such as Bees wax, Carnauba wax, Candilla wax, Linseed oil, Sunflower oil, Jojoba oil. It contains no biocides or preservatives.

 

Features:

Natural finish to help timber look as close to unfinished raw timber as possible/
No sanding required between coats
Withstands high temperatures
Very durable
Easy to maintain with Treatex Wax Polish
Spot repairable
Slip resistance test BS 7976-2PTV. Suitable for domestic, commercial and wet areas.
Complies with regulation DIN 68861-1B: Resistance to spills of water, wine, beer, coffee, tea, fizzy drinks etc
Safe for use on children’s toys: DIN EN 71-3
Meets with VOC emissions regulations
Recommended for those with dust allergies; dirt and dust can be removed easily
Contains no biocides, preservatives or carcinogens
Slip resistance further increased with the addition of Treatex R12 Anti-SlipEasy to apply – buffed, brushed or rolled on
Quick drying – usually dry within 3-6 hours
Low odour
Water resistant
Very durable – further strengthened with Treatex hardener

Easy to clean with Treatex Floor Care or Treatex Spray on Floor and Surface Clean

 

 

Usage:

Suitable for: Internal use

Recommended timbers: All (dense/oily timbers may require Treatex Thinner). Has a warming effect on some timbers.

Applications: Floors, doors, stairs, worktops, woodturning, skirting, furniture, instruments etc.

 

Coverage:

1L will cover approximately 20m² in one coat / 12m² in two coats depending on the timber and method of application.
2.5L will cover approximately 50m² in one coat / 30m² in two coats depending on the timber and method of application.

 

Compatible with:

Treatex Colour Tones / Hardener / Thinner / Natural Hardwax Oil / Wax Polish / Floor Care / Preparation Cleaner / R12 Anti-Slip additive.

 

Tips:

If Treatex Hardwax Oil is applied too thickly, drying time will be increased. To speed up drying time raise the room temperature and increase air flow by opening doors and windows, or using a fan.

Treatex brushes and rollers are available. Alternatively, use a high qulaity micrfibre roller or good quality brush. Tightly wrap a plastic bag around wet rollers and brushes to stop them drying out between coats. Wet brushes and rollers can be cleaned using white spirit. If you are using hardener then wet rollers and brushes will dry even if they are wrapped in a plastic bag and it will not be possible to clean them.