Treatex Hard Wax Oil Ultra Clear

Treatex Hardwax Oil Ultra is our next-generation Hardwax Oil, designed to enhance and protect the natural beauty of all your interior timber surfaces. Hardwax Oil Ultra follows the success of our current formulas benefits of being user-friendly, easy to apply, and quick drying, whilst improving ease of application and the durability of the finish.

The end result is a hard-wearing, attractive finish in any situation including, floors, doors and kitchen worktops that is easy to maintain with our maintenance products and is spot repairable if the surface is damaged.

Treatex Hardwax Oil Ultra is also based on the Treatex formulation of sustainable raw materials such as Bees wax, Carnauba wax, Candelilla wax, Linseed oil, Sunflower oil, and Jojoba oil. It contains no biocides or preservatives.

 

Features:

• Comes in Flat Matt, Matt, Satin or Gloss sheen levels
• Has a warming effect on lighter-coloured timbers
• No sanding is required between coats
• Withstands high temperatures
• Very durable
• Easy to maintain with Treatex Wax Polish
• Spot repairable
• Slip resistance test BS 7976-2PTV. Suitable for domestic, commercial and wet areas.
• Complies with regulation DIN 68861-1B: Resistance to spills of water, wine, beer, coffee, tea, fizzy drinks etc
• Safe for use on children’s toys: DIN EN 71-3
• Meets with VOC emissions regulations
• Recommended for those with dust allergies; dirt and dust can be removed easily
• Contains no biocides, preservatives or carcinogens
• Slip resistance further increased with the addition of Treatex R12 Anti-SlipEasy to apply – buffed, brushed or rolled on
• Quick drying – usually dry within 3-6 hours
• Low odour
• Water-resistant
• Very durable – further strengthened with Treatex hardener
• Easy to clean with Treatex Floor Care or Treatex Spray on Floor and Surface Clean

 

 

Usage:

Suitable for: Internal use

Recommended timbers: All (dense/oily timbers may require Treatex Thinner). Has a warming effect on some timbers.

Applications: Floors, doors, stairs, worktops, woodturning, skirting, furniture, instruments etc.

 

Coverage:

1L will cover approximately 20m² in one coat / 12m² in two coats depending on the timber and method of application.
2.5L will cover approximately 50m² in one coat / 30m² in two coats depending on the timber and method of application.

 

Compatible with:

Treatex Colour Tones / Hardener / Thinner / Natural Hardwax Oil / Wax Polish / Floor Care / Preparation Cleaner / R12 Anti-Slip additive.

 

Tips:

If Treatex Hardwax Oil is applied too thickly, drying time will be increased. To speed up drying time raise the room temperature and increase airflow by opening doors and windows, or using a fan.

Treatex brushes and rollers are available. Alternatively, use a high-quality microfibre roller or good-quality brush. Tightly wrap a plastic bag around wet rollers and brushes to stop them from drying out between coats. Wet brushes and rollers can be cleaned using white spirit. If you are using a hardener then wet rollers and brushes will dry even if they are wrapped in a plastic bag and it will not be possible to clean them.