Osmo Stone And Terracotta Oil 620 For Exterior

A moisture-repellent barrier made from a unique blend of oils. Protects stone and terracotta surfaces against moisture damage, surface scuffs, staining and scratches. Greatly reduces dust from screed and concrete surfaces.

 

Features & Highlights

• An oil-based moisture-repellent barrier for stone, terracotta, granite, and more.
• Penetrates deep into the substrate.
• Scratch, scuff and stain resistant.
• Reduces dust from screed and concrete surfaces.
• Does not crack, peel, flake or blister.
• Dries to a clear, natural finish in a satin sheen.
• Very high V.O.C

 

Overview

Osmo Stone and Terracotta Oil is an oile-based protector made from a unique blend of oils, creating a water and dirt-repellent barrier. It is ideally suited to window sills & paving made of granite, limestone and slate. It is stain resistant and greatly reduces dust from concrete and screed surfaces.

Looking for a natural oil that protects internal concrete and tiles, try Osmo Concrete Oil.

Please note: Applying this product to porous, underfoot surfaces such as paving may alter the surface characteristics and clip resistance. Due to the nature of this product, water is more likely to bead on path and patio surfaces. It may cause yellowing to white and other light-coloured surfaces.

 

Preparation

Ensure that the surfaces to be coated are clean, dry & free from dirt, dust, grease, wax, polish and any other surface contaminants. To ensure successful treatment, Osmo Stone and Terracotta Oil should be applied to porous substrates only.

 

Application

Always do a test area before starting any project to assess product suitability and final finish, as yellowing may occur on white and light-coloured surfaces. Follow the manufacturer’s instructions on the container at all times.

Osmo Stone and Terracotta Oil is ready for use from the container and should not be diluted. Stir well, do not shake.

1. Apply first coat thinly and evenly using an Osmo Microfiber Floor Roller or Osmo Floor Brush and for small areas an Osmo Quality Natural Bristle Brush.
2. Remove any surplus oil using a pad or lint-free cloth.
3. For larger areas, remove any excess oil using a rubber scraper and polish with a buffing machine.
4. Once oil has been absorbed, allow to dry for 8-10 hours.
5. Apply a second thin coat and allow it to fully dry.
6. If renovating a previously oiled finish, then one coat on a prepared surface should be sufficient.

 

Cleaning Equipment

Application equipment can be cleaned using Osmo Brush Cleaner and Thinner(8000)