Osmo Liquid Wax Cleaner

Cleaner, reviver and restorer for waxed and oiled wood to restore the look and luster of tired or worn looking finishes.

 

Overview

Osmo Liquid Wax Cleaner (3029) is especially designed to refresh and regenerate oiled floors in areas such as hallways and door entrances that are subject to high foot traffic. Perfect for repairing scratches and dull patches on an existing Osmo Polyx Oil finish.

Please Note: Osmo Liquid Wax Cleaner ‘White’ is for white coloured surfaces only. For example, wooden surfaces treated with Osmo Polyx Oil Tints White (3040), Osmo Wood Wax Finish Transparent White (3111) and Osmo Polyx Oil Raw (3044).

• This product is also available in a handy spray version, see Osmo Liquid Wax Cleaner Spray.

 

Preparation

Surfaces to be treated should be clean, dry and dust-free. Wipe with a damp mop or lint-free cloth then allow to dry before applying Osmo Liquid Wax Cleaner.

Floor surfaces that are prone to heavier traffic, such as commercial areas, should be damp mopped with Osmo Wash And Care and an Osmo Micro Mop or alternatively, Osmo Flexi Spray Mop then buffed dry prior to application of Liquid Wax Cleaner.

 

Application

Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer’s instructions on the tin at all times. Shake the container thoroughly before use.

1. Pour a small amount of Liquid Wax Cleaner onto an Osmo Microfibre and Dust Mop Head or other lint-free cloth / mop
2. Apply to the wood surface thinly and work into the area to be cleaned
3. For deep stains, scuffs and minor scratches, lightly abrade the affected area with a finishing pad or scotch pad to remove the mark, stain or scratch, then work Osmo Liquid Wax Cleaner into the affected area

Surfaces treated with Osmo Liquid Wax Cleaner can be buffed with a lint-free-cloth or Osmo Lightweight White Floor Superpad when dry, to improve the sheen level of the finish if required.

 

Aftercare

To retain oiled finishes, Osmo Liquid Wax Cleaner should be applied as required, depending on surface wear and condition.