Bona Natural Primer 5L

Product Advantages

Bona Natural Primer is a tinted single-component waterborne polyurethane/acrylate primer designed to keep the impression of raw, untreated wood.

Quick to dry and good abrasion qualities. For the lightest, most natural appearance overcoat with Bona Traffic Natural.

 

Technical Spec

Coverage rate: 10-12m²/litre per coat

Drying time, until: – 2-3 hours at 20°C/60% R.H.

 

Preparation

Ensure the floor is acclimatized to its end-use environment. The surface which is to be coated must be sanded back to bare wood, dry and free from sanding dust, oil, wax and other contamination. It is recommended to finalize the sanding with a Bona Quattro or Multi Disc.

Allow the primer to reach room temperature.

Optimal application conditions are between 18-25°C and 30-60% relative air humidity.

High temperatures and low humidity shorten, and low temperatures and high humidity lengthen drying time. The minimum temperature for use is 13°C.

 

Application

1. Shake the container thoroughly before use and insert the supplied filter. Pour finish into a container (box + bag). It is recommended to pour through an external strainer so as to minimize the potential for lumps.

2. Apply Bona White using a roller (microfiber/fleece) at approx. 12 m²/lit (83 g/m²), avoiding the accumulation of product.

3. When dry (approx. 2-3 hours), abrade to reduce grain raise using the Bona Scrad system or a sanding screen grit 150 or finer.

4. Remove all dust

5. Apply an additional layer of Prime Natural sealing the surface with one of Bona’s protective lacquers

 

Cleaning

Cleaning: Wipe tools free from excess lacquer before cleaning with water. Dried material can be removed with acetone

 

Maintenance / Aftercare

Bona White should never be used as the final treatment for timber floors

Storage / Shelf life
Shelf life: 1 year from date of production in unopened original container
The temperature must not fall below +5°C or exceed +25°C during storage