120mm Herringbone Distressed, Hand Scraped, Brushed & Matt Lacquered Engineered Biscuit Oak Parquet Wood Flooring 0.864m²

This pack consists of half left and half right planks to enable a herringbone pattern

 

Pack Coverage: 1.728m²

Size: (L) 600mm x (W) 120mm x (D) 18/4mm 

Species: Oak 

Grade: Natural ABCD 

Finish: Distressed, Hand Scraped, Brushed & Matt Lacquered

Type: Tongue and groove fit with micro bevelled edges. 

Construction: Engineered plank, 4mm hardwood wear layer, plywood backed

Installation: Glue down (with Sika MS wood floor)

 

All photography on this website is reproduced as accurately as screen resolutions will allow. Flooring colours may appear differently depending on the shape, size and lighting of a room (please order a free sample to get a more accurate colour).

 

Wood Flooring Type – Engineered Wood

Engineered hardwood flooring is extremely versatile and durable so the perfect choice for any room in your home.  It is constructed of a wear layer of your chosen species of wood and then a plywood base to give stability and strength.   Once it has been installed it looks just like solid wood flooring, although you have the extra benefits of choosing from wider and longer boards, being able to use it with underfloor heating if you wish, and it can be installed in different ways depending upon requirements.

 

Species – Oak

Oak is by far the most popular choice when it comes to hardwood flooring. It is a timeless and traditional flooring which can also offer a modern feel to a contemporary space. Its pale cream, golden and darker tones create a unique grain pattern where no two planks of flooring are the same.  It is a relatively hard and durable flooring material and can last a lifetime if looked after properly. 

 

Wood Grade – Natural

Natural grade or ABCD grade hardwood flooring shows the natural character of the wood with a range of colour variations and some larger knots. Sapwood will also be visible.

 

Finish – Distressed, Hand Scraped, Brushed and Lacquered

A brushed and lacquered finish to hardwood flooring means that the surface of the flooring has been lightly brushed to expose the natural qualities and charm of the wood without causing any damage. The hardwood has then been finished with protective layers of lacquer. The floor will be ready to use once installation is complete.

 

Fit – Parquet

Parquet block is smaller individual blocks of flooring with square edges that can laid in different ways to create a range of geometrical patterns.

 

Installation method – Direct Glue Down

By gluing your hardwood floor directly down to the subfloor you will create a full surface bond between the existing floor and your new hardwood floor.  You will need to use a flexible flooring adhesive to allow for natural movements with changes in temperature and humidity. Either solid wood flooring or engineered wood flooring can be glued to the subfloor.

 

Acclimatisation

Your hardwood flooring will need to acclimatise to its surroundings before it can be installed.  Solid wood flooring should be left for at least 7 days and engineered wood flooring should be left for at least 3 days.  It should be left in the room where it is going to be installed, which should be dry (no new drying plaster or concrete), heated to between 18 to 24° C and with a relative humidity of between 45-60%. 

 

Maintenance & Aftercare

All types of hardwood floors are easy to look after and maintain. Simply sweep on a daily basis with a soft bristle brush to remove any dirt or dust, and then clean on a weekly basis (more often if needed) using a microfibre mop and wooden floor cleaning spray. To prevent any unwanted dents or damage to your hardwood, remember to remove outdoor footwear, use felt protector pads on the bottom of furniture, wipe away spills immediately and never drag heavy or sharp object across the floor. This will ensure that you floor keeps looking at its best for as long as possible.